commit aafe133906196555c6fa4a1d65977dc3cd2c4349 Author: Greg Kroah-Hartman Date: Thu Sep 3 11:19:28 2020 +0200 Linux 4.4.235 Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman commit bd80272251d27d263ff9ca63d85193adf556678f Author: Hector Martin Date: Sun Aug 16 17:44:31 2020 +0900 ALSA: usb-audio: Update documentation comment for MS2109 quirk commit 74a2a7de81a2ef20732ec02087314e92692a7a1b upstream. As the recent fix addressed the channel swap problem more properly, update the comment as well. Fixes: 1b7ecc241a67 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109") Signed-off-by: Hector Martin Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 61f5f326ff04e31ce12c6ff2747376dd6e7ff0d3 Author: Peilin Ye Date: Wed Jul 29 07:37:12 2020 -0400 HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage() commit 25a097f5204675550afb879ee18238ca917cba7a upstream. `uref->usage_index` is not always being properly checked, causing hiddev_ioctl_usage() to go out of bounds under some cases. Fix it. Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802 Reviewed-by: Dan Carpenter Signed-off-by: Peilin Ye Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 14edfd508f43723961ed70c07afb9f8ed5341f9d Author: Josef Bacik Date: Mon Aug 10 17:31:16 2020 -0400 btrfs: check the right error variable in btrfs_del_dir_entries_in_log [ Upstream commit fb2fecbad50964b9f27a3b182e74e437b40753ef ] With my new locking code dbench is so much faster that I tripped over a transaction abort from ENOSPC. This turned out to be because btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this function sets err on error, and returns err. So instead of properly marking the inode as needing a full commit, we were returning -ENOSPC and aborting in __btrfs_unlink_inode. Fix this by checking the proper variable so that we return the correct thing in the case of ENOSPC. The ENOENT needs to be checked, because btrfs_lookup_dir_item_index() can return -ENOENT if the dir item isn't in the tree log (which would happen if we hadn't fsync'ed this guy). We actually handle that case in __btrfs_unlink_inode, so it's an expected error to get back. Fixes: 4a500fd178c8 ("Btrfs: Metadata ENOSPC handling for tree log") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba [ add note and comment about ENOENT ] Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 973152b568cc28c15fb59ba446382486352bd099 Author: Alan Stern Date: Wed Aug 26 10:32:29 2020 -0400 usb: storage: Add unusual_uas entry for Sony PSZ drives commit 20934c0de13b49a072fb1e0ca79fe0fe0e40eae5 upstream. The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by: Till Dörges Signed-off-by: Alan Stern CC: Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 3fae4606bc497728d4a3c11a83136623f555ec6f Author: Tang Bin Date: Wed Aug 26 22:49:31 2020 +0800 usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe() commit 1d4169834628d18b2392a2da92b7fbf5e8e2ce89 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju Cc: stable Signed-off-by: Tang Bin Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman commit e69382df6724cce4ff8f2cde08e04e48264ba008 Author: Cyril Roelandt Date: Tue Aug 25 23:22:31 2020 +0200 USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge commit 9aa37788e7ebb3f489fb4b71ce07adadd444264a upstream. This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern CC: Signed-off-by: Cyril Roelandt Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman commit 1fa308e648c1ef18eb56e8e316367bd6fc58ce2f Author: Kai-Heng Feng Date: Fri Jul 31 13:16:20 2020 +0800 USB: quirks: Add no-lpm quirk for another Raydium touchscreen commit 5967116e8358899ebaa22702d09b0af57fef23e1 upstream. There's another Raydium touchscreen needs the no-lpm quirk: [ 1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00 [ 1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.339151] usb 1-9: Product: Raydium Touch System [ 1.339152] usb 1-9: Manufacturer: Raydium Corporation ... [ 6.450497] usb 1-9: can't set config #1, error -110 BugLink: https://bugs.launchpad.net/bugs/1889446 Signed-off-by: Kai-Heng Feng Cc: stable Link: https://lore.kernel.org/r/20200731051622.28643-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman commit a0788be4fb41c2f94018d239d0d800735d5baaf3 Author: Thinh Nguyen Date: Tue Aug 18 19:27:47 2020 -0700 usb: uas: Add quirk for PNY Pro Elite commit 9a469bc9f32dd33c7aac5744669d21a023a719cd upstream. PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12 pass-through command (i.e. it just hangs). If it doesn't support this command, it should respond properly to the host. Let's just add a quirk to be able to move forward with other operations. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/2b0585228b003eedcc82db84697b31477df152e0.1597803605.git.thinhn@synopsys.com Signed-off-by: Greg Kroah-Hartman commit 9c218a4ad3d146a14c596e83426dc5ef3787cc3b Author: Alan Stern Date: Mon Aug 10 14:29:54 2020 -0400 USB: yurex: Fix bad gfp argument commit f176ede3a3bde5b398a6777a7f9ff091baa2d3ff upstream. The syzbot fuzzer identified a bug in the yurex driver: It passes GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING: do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000370c7c68>] prepare_to_wait+0xb1/0x2a0 kernel/sched/wait.c:247 WARNING: CPU: 1 PID: 340 at kernel/sched/core.c:7253 __might_sleep+0x135/0x190 kernel/sched/core.c:7253 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 340 Comm: syz-executor677 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 panic+0x2aa/0x6e1 kernel/panic.c:231 __warn.cold+0x20/0x50 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x41/0x80 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:__might_sleep+0x135/0x190 kernel/sched/core.c:7253 Code: 65 48 8b 1c 25 40 ef 01 00 48 8d 7b 10 48 89 fe 48 c1 ee 03 80 3c 06 00 75 2b 48 8b 73 10 48 c7 c7 e0 9e 06 86 e8 ed 12 f6 ff <0f> 0b e9 46 ff ff ff e8 1f b2 4b 00 e9 29 ff ff ff e8 15 b2 4b 00 RSP: 0018:ffff8881cdb77a28 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881c6458000 RCX: 0000000000000000 RDX: ffff8881c6458000 RSI: ffffffff8129ec93 RDI: ffffed1039b6ef37 RBP: ffffffff86fdade2 R08: 0000000000000001 R09: ffff8881db32f54f R10: 0000000000000000 R11: 0000000030343354 R12: 00000000000001f2 R13: 0000000000000000 R14: 0000000000000068 R15: ffffffff83c1b1aa slab_pre_alloc_hook.constprop.0+0xea/0x200 mm/slab.h:498 slab_alloc_node mm/slub.c:2816 [inline] slab_alloc mm/slub.c:2900 [inline] kmem_cache_alloc_trace+0x46/0x220 mm/slub.c:2917 kmalloc include/linux/slab.h:554 [inline] dummy_urb_enqueue+0x7a/0x880 drivers/usb/gadget/udc/dummy_hcd.c:1251 usb_hcd_submit_urb+0x2b2/0x22d0 drivers/usb/core/hcd.c:1547 usb_submit_urb+0xb4e/0x13e0 drivers/usb/core/urb.c:570 yurex_write+0x3ea/0x820 drivers/usb/misc/yurex.c:495 This patch changes the call to use GFP_ATOMIC instead of GFP_KERNEL. Reported-and-tested-by: syzbot+c2c3302f9c601a4b1be2@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Link: https://lore.kernel.org/r/20200810182954.GB307778@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 31f5f13cb06da0090b93bae0e6d545926d9bed5a Author: Heikki Krogerus Date: Fri Aug 21 13:53:42 2020 +0300 device property: Fix the secondary firmware node handling in set_primary_fwnode() commit c15e1bdda4365a5f17cdadf22bf1c1df13884a9e upstream. When the primary firmware node pointer is removed from a device (set to NULL) the secondary firmware node pointer, when it exists, is made the primary node for the device. However, the secondary firmware node pointer of the original primary firmware node is never cleared (set to NULL). To avoid situation where the secondary firmware node pointer is pointing to a non-existing object, clearing it properly when the primary node is removed from a device in set_primary_fwnode(). Fixes: 97badf873ab6 ("device property: Make it possible to use secondary firmware nodes") Cc: All applicable Signed-off-by: Heikki Krogerus Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit b7e4ff6327aedb546b1fa5f9702bfe1577a47e47 Author: Rafael J. Wysocki Date: Mon Aug 24 19:35:31 2020 +0200 PM: sleep: core: Fix the handling of pending runtime resume requests commit e3eb6e8fba65094328b8dca635d00de74ba75b45 upstream. It has been reported that system-wide suspend may be aborted in the absence of any wakeup events due to unforseen interactions of it with the runtume PM framework. One failing scenario is when there are multiple devices sharing an ACPI power resource and runtime-resume needs to be carried out for one of them during system-wide suspend (for example, because it needs to be reconfigured before the whole system goes to sleep). In that case, the runtime-resume of that device involves turning the ACPI power resource "on" which in turn causes runtime-resume requests to be queued up for all of the other devices sharing it. Those requests go to the runtime PM workqueue which is frozen during system-wide suspend, so they are not actually taken care of until the resume of the whole system, but the pm_runtime_barrier() call in __device_suspend() sees them and triggers system wakeup events for them which then cause the system-wide suspend to be aborted if wakeup source objects are in active use. Of course, the logic that leads to triggering those wakeup events is questionable in the first place, because clearly there are cases in which a pending runtime resume request for a device is not connected to any real wakeup events in any way (like the one above). Moreover, it is racy, because the device may be resuming already by the time the pm_runtime_barrier() runs and so if the driver doesn't take care of signaling the wakeup event as appropriate, it will be lost. However, if the driver does take care of that, the extra pm_wakeup_event() call in the core is redundant. Accordingly, drop the conditional pm_wakeup_event() call fron __device_suspend() and make the latter call pm_runtime_barrier() alone. Also modify the comment next to that call to reflect the new code and extend it to mention the need to avoid unwanted interactions between runtime PM and system-wide device suspend callbacks. Fixes: 1e2ef05bb8cf8 ("PM: Limit race conditions between runtime PM and system sleep (v2)") Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Reported-by: Utkarsh H Patel Tested-by: Utkarsh H Patel Tested-by: Pengfei Xu Cc: All applicable Signed-off-by: Greg Kroah-Hartman commit 6fa4be261454dd5091e045539138bff1c2dc5605 Author: Kai-Heng Feng Date: Fri Aug 21 12:15:48 2020 +0300 xhci: Do warm-reset when both CAS and XDEV_RESUME are set commit 904df64a5f4d5ebd670801d869ca0a6d6a6e8df6 upstream. Sometimes re-plugging a USB device during system sleep renders the device useless: [ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262 ... [ 176.496485] usb 2-4: Waited 2000ms for CONNECT [ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19 [ 176.497103] usb 2-4: can't resume, status -19 [ 176.497438] usb usb2-port4: logical disconnect Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore, despite of CAS bit is flagged. So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for the port. Cc: stable Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit dd45bd060396d51ef30826ac5cee0b6a7c17e9aa Author: Thomas Gleixner Date: Tue Aug 25 17:22:58 2020 +0200 XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information. commit c330fb1ddc0a922f044989492b7fcca77ee1db46 upstream. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik Signed-off-by: Thomas Gleixner Tested-by: Roman Shaposhnik Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman commit 402050e52ce05ba654a9ae13a8934012e555105f Author: Jan Kara Date: Fri May 29 16:08:58 2020 +0200 writeback: Fix sync livelock due to b_dirty_time processing commit f9cae926f35e8230330f28c7b743ad088611a8de upstream. When we are processing writeback for sync(2), move_expired_inodes() didn't set any inode expiry value (older_than_this). This can result in writeback never completing if there's steady stream of inodes added to b_dirty_time list as writeback rechecks dirty lists after each writeback round whether there's more work to be done. Fix the problem by using sync(2) start time is inode expiry value when processing b_dirty_time list similarly as for ordinarily dirtied inodes. This requires some refactoring of older_than_this handling which simplifies the code noticeably as a bonus. Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 05829bc2388c3b2f3b114fe90f669e97026a7bd4 Author: Jan Kara Date: Fri May 29 15:05:22 2020 +0200 writeback: Avoid skipping inode writeback commit 5afced3bf28100d81fb2fe7e98918632a08feaf5 upstream. Inode's i_io_list list head is used to attach inode to several different lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker prepares a list of inodes to writeback e.g. for sync(2), it moves inodes to b_io list. Thus it is critical for sync(2) data integrity guarantees that inode is not requeued to any other writeback list when inode is queued for processing by flush worker. That's the reason why writeback_single_inode() does not touch i_io_list (unless the inode is completely clean) and why __mark_inode_dirty() does not touch i_io_list if I_SYNC flag is set. However there are two flaws in the current logic: 1) When inode has only I_DIRTY_TIME set but it is already queued in b_io list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC) can still move inode back to b_dirty list resulting in skipping writeback of inode time stamps during sync(2). 2) When inode is on b_dirty_time list and writeback_single_inode() races with __mark_inode_dirty() like: writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES) inode->i_state |= I_SYNC __writeback_single_inode() inode->i_state |= I_DIRTY_PAGES; if (inode->i_state & I_SYNC) bail if (!(inode->i_state & I_DIRTY_ALL)) - not true so nothing done We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus standard background writeback will not writeback this inode leading to possible dirty throttling stalls etc. (thanks to Martijn Coenen for this analysis). Fix these problems by tracking whether inode is queued in b_io or b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we know flush worker has queued inode and we should not touch i_io_list. On the other hand we also know that once flush worker is done with the inode it will requeue the inode to appropriate dirty list. When I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode to appropriate dirty list. Reported-by: Martijn Coenen Reviewed-by: Martijn Coenen Tested-by: Martijn Coenen Reviewed-by: Christoph Hellwig Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 311e34b3b4dcc669f2d272b4281c41b109256b94 Author: Jan Kara Date: Wed Jun 10 17:36:03 2020 +0200 writeback: Protect inode->i_io_list with inode->i_lock commit b35250c0816c7cf7d0a8de92f5fafb6a7508a708 upstream. Currently, operations on inode->i_io_list are protected by wb->list_lock. In the following patches we'll need to maintain consistency between inode->i_state and inode->i_io_list so change the code so that inode->i_lock protects also all inode's i_io_list handling. Reviewed-by: Martijn Coenen Reviewed-by: Christoph Hellwig CC: stable@vger.kernel.org # Prerequisite for "writeback: Avoid skipping inode writeback" Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit bf485f58b464029f80bc0bed7ac2fded6f4078e8 Author: Sergey Senozhatsky Date: Mon Aug 17 11:26:46 2020 +0900 serial: 8250: change lock order in serial8250_do_startup() commit 205d300aea75623e1ae4aa43e0d265ab9cf195fd upstream. We have a number of "uart.port->desc.lock vs desc.lock->uart.port" lockdep reports coming from 8250 driver; this causes a bit of trouble to people, so let's fix it. The problem is reverse lock order in two different call paths: chain #1: serial8250_do_startup() spin_lock_irqsave(&port->lock); disable_irq_nosync(port->irq); raw_spin_lock_irqsave(&desc->lock) chain #2: __report_bad_irq() raw_spin_lock_irqsave(&desc->lock) for_each_action_of_desc() printk() spin_lock_irqsave(&port->lock); Fix this by changing the order of locks in serial8250_do_startup(): do disable_irq_nosync() first, which grabs desc->lock, and grab uart->port after that, so that chain #1 and chain #2 have same lock order. Full lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.4.39 #55 Not tainted ====================================================== swapper/0/0 is trying to acquire lock: ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57 but task is already holding lock: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&irq_desc_lock_class){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d __irq_get_desc_lock+0x65/0x89 __disable_irq_nosync+0x3b/0x93 serial8250_do_startup+0x451/0x75c uart_startup+0x1b4/0x2ff uart_port_activate+0x73/0xa0 tty_port_open+0xae/0x10a uart_open+0x1b/0x26 tty_open+0x24d/0x3a0 chrdev_open+0xd5/0x1cc do_dentry_open+0x299/0x3c8 path_openat+0x434/0x1100 do_filp_open+0x9b/0x10a do_sys_open+0x15f/0x3d7 kernel_init_freeable+0x157/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d serial8250_console_write+0xa7/0x2a0 console_unlock+0x3b7/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 register_console+0x336/0x3a4 uart_add_one_port+0x51b/0x5be serial8250_register_8250_port+0x454/0x55e dw8250_probe+0x4dc/0x5b9 platform_drv_probe+0x67/0x8b really_probe+0x14a/0x422 driver_probe_device+0x66/0x130 device_driver_attach+0x42/0x5b __driver_attach+0xca/0x139 bus_for_each_dev+0x97/0xc9 bus_add_driver+0x12b/0x228 driver_register+0x64/0xed do_one_initcall+0x20c/0x4a6 do_initcall_level+0xb5/0xc5 do_basic_setup+0x4c/0x58 kernel_init_freeable+0x13f/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #0 (console_owner){-...}: __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 console_lock_spinning_enable+0x51/0x57 console_unlock+0x25d/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 ret_from_intr+0x0/0x1d cpuidle_enter_state+0x12f/0x1fd cpuidle_enter+0x2e/0x3d do_idle+0x1ce/0x2ce cpu_startup_entry+0x1d/0x1f start_kernel+0x406/0x46a secondary_startup_64+0xa4/0xb0 other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &irq_desc_lock_class Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&irq_desc_lock_class); lock(&port_lock_key); lock(&irq_desc_lock_class); lock(console_owner); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55 Hardware name: XXXXXX Call Trace: dump_stack+0xbf/0x133 ? print_circular_bug+0xd6/0xe9 check_noncircular+0x1b9/0x1c3 __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 ? console_lock_spinning_enable+0x31/0x57 console_lock_spinning_enable+0x51/0x57 ? console_lock_spinning_enable+0x31/0x57 console_unlock+0x25d/0x528 ? console_trylock+0x18/0x4e vprintk_emit+0x111/0x17f ? lock_acquire+0x203/0x258 printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 common_interrupt+0xf/0xf Signed-off-by: Sergey Senozhatsky Fixes: 768aec0b5bcc ("serial: 8250: fix shared interrupts issues with SMP and RT kernels") Reported-by: Guenter Roeck Reported-by: Raul Rangel BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800 Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#u Reviewed-by: Andy Shevchenko Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Cc: stable Link: https://lore.kernel.org/r/20200817022646.1484638-1-sergey.senozhatsky@gmail.com Signed-off-by: Greg Kroah-Hartman commit e779f66d74ff6c68cc18f28cc36c3f93c835e6db Author: Lukas Wunner Date: Thu Aug 13 12:59:54 2020 +0200 serial: pl011: Don't leak amba_ports entry on driver register error commit 89efbe70b27dd325d8a8c177743a26b885f7faec upstream. pl011_probe() calls pl011_setup_port() to reserve an amba_ports[] entry, then calls pl011_register_port() to register the uart driver with the tty layer. If registration of the uart driver fails, the amba_ports[] entry is not released. If this happens 14 times (value of UART_NR macro), then all amba_ports[] entries will have been leaked and driver probing is no longer possible. (To be fair, that can only happen if the DeviceTree doesn't contain alias IDs since they cause the same entry to be used for a given port.) Fix it. Fixes: ef2889f7ffee ("serial: pl011: Move uart_register_driver call to device") Signed-off-by: Lukas Wunner Cc: stable@vger.kernel.org # v3.15+ Cc: Tushar Behera Link: https://lore.kernel.org/r/138f8c15afb2f184d8102583f8301575566064a6.1597316167.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman commit ac2148d3e671b4e2ab248bc74cb279a4c5c47324 Author: Tamseel Shams Date: Mon Aug 10 08:30:21 2020 +0530 serial: samsung: Removes the IRQ not found warning commit 8c6c378b0cbe0c9f1390986b5f8ffb5f6ff7593b upstream. In few older Samsung SoCs like s3c2410, s3c2412 and s3c2440, UART IP is having 2 interrupt lines. However, in other SoCs like s3c6400, s5pv210, exynos5433, and exynos4210 UART is having only 1 interrupt line. Due to this, "platform_get_irq(platdev, 1)" call in the driver gives the following false-positive error: "IRQ index 1 not found" on newer SoC's. This patch adds the condition to check for Tx interrupt only for the those SoC's which have 2 interrupt lines. Tested-by: Alim Akhtar Tested-by: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar Signed-off-by: Tamseel Shams Cc: stable Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com Signed-off-by: Greg Kroah-Hartman commit f24fa90862acb02ba5caa4bf9060d8b829bceb82 Author: George Kennedy Date: Fri Jul 31 12:33:12 2020 -0400 vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize() commit bc5269ca765057a1b762e79a1cfd267cd7bf1c46 upstream. vc_resize() can return with an error after failure. Change VT_RESIZEX ioctl to save struct vc_data values that are modified and restore the original values in case of error. Signed-off-by: George Kennedy Cc: stable Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-2-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman commit 130c03c86d23aa411ae669a8223cb409f4ff0f2a Author: Tetsuo Handa Date: Wed Jul 29 23:57:01 2020 +0900 vt: defer kfree() of vc_screenbuf in vc_do_resize() commit f8d1653daec02315e06d30246cff4af72e76e54e upstream. syzbot is reporting UAF bug in set_origin() from vc_do_resize() [1], for vc_do_resize() calls kfree(vc->vc_screenbuf) before calling set_origin(). Unfortunately, in set_origin(), vc->vc_sw->con_set_origin() might access vc->vc_pos when scroll is involved in order to manipulate cursor, but vc->vc_pos refers already released vc->vc_screenbuf until vc->vc_pos gets updated based on the result of vc->vc_sw->con_set_origin(). Preserving old buffer and tolerating outdated vc members until set_origin() completes would be easier than preventing vc->vc_sw->con_set_origin() from accessing outdated vc members. [1] https://syzkaller.appspot.com/bug?id=6649da2081e2ebdc65c0642c214b27fe91099db3 Reported-by: syzbot Signed-off-by: Tetsuo Handa Cc: stable Link: https://lore.kernel.org/r/1596034621-4714-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman commit e35d476bca93c276aeaa481d4b4da0eb21c50b80 Author: Evgeny Novikov Date: Wed Aug 5 12:06:43 2020 +0300 USB: lvtest: return proper error code in probe commit 531412492ce93ea29b9ca3b4eb5e3ed771f851dd upstream. lvs_rh_probe() can return some nonnegative value from usb_control_msg() when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as a failure. Make lvs_rh_probe() return -EINVAL in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov Cc: stable Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman commit ae021a904ac82d9fc81c25329d3c465c5a7d5686 Author: George Kennedy Date: Fri Jul 31 12:33:11 2020 -0400 fbcon: prevent user font height or width change from causing potential out-of-bounds access commit 39b3cffb8cf3111738ea993e2757ab382253d86a upstream. Add a check to fbcon_resize() to ensure that a possible change to user font height or user font width will not allow a font data out-of-bounds access. NOTE: must use original charcount in calculation as font charcount can change and cannot be used to determine the font data allocated size. Signed-off-by: George Kennedy Cc: stable Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman commit 6f8f77d9fd130592c072d1ad621a66106c2f10fe Author: Sumera Priyadarsini Date: Wed Aug 19 00:22:41 2020 +0530 net: gianfar: Add of_node_put() before goto statement [ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ] Every iteration of for_each_available_child_of_node() decrements reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in gianfar.c by inserting of_node_put() before the goto statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 00b94b3e7898ef655501818b7d4883ed4912b5e8 Author: Stanley Chu Date: Sun Aug 9 13:07:34 2020 +0800 scsi: ufs: Fix possible infinite loop in ufshcd_hold [ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ] In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow. Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state. Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman Co-developed-by: Andy Teng Signed-off-by: Andy Teng Signed-off-by: Stanley Chu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c86b5b56fb1b356b8f71973b6ac6bd9bfb842f2c Author: Vineeth Vijayan Date: Thu Jun 18 16:42:45 2020 +0200 s390/cio: add cond_resched() in the slow_eval_known_fn() loop [ Upstream commit 0b8eb2ee9da1e8c9b8082f404f3948aa82a057b2 ] The scanning through subchannels during the time of an event could take significant amount of time in case of platforms with lots of known subchannels. This might result in higher scheduling latencies for other tasks especially on systems with a single CPU. Add cond_resched() call, as the loop in slow_eval_known_fn() can be executed for a longer duration. Reviewed-by: Peter Oberparleiter Signed-off-by: Vineeth Vijayan Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin commit 35af8a3a8402aa8629674e8f101608d3643f1495 Author: zhangyi (F) Date: Sat Jun 20 10:54:26 2020 +0800 jbd2: abort journal if free a async write error metadata buffer [ Upstream commit c044f3d8360d2ecf831ba2cc9f08cf9fb2c699fb ] If we free a metadata buffer which has been failed to async write out in the background, the jbd2 checkpoint procedure will not detect this failure in jbd2_log_do_checkpoint(), so it may lead to filesystem inconsistency after cleanup journal tail. This patch abort the journal if free a buffer has write_io_error flag to prevent potential further inconsistency. Signed-off-by: zhangyi (F) Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 2889f4beb39cb624253b497653eed4a240c08c6d Author: Lukas Czerner Date: Wed Jun 17 11:25:49 2020 +0200 jbd2: make sure jh have b_transaction set in refile/unfile_buffer [ Upstream commit 24dc9864914eb5813173cfa53313fcd02e4aea7d ] Callers of __jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() assume that the b_transaction is set. In fact if it's not, we can end up with journal_head refcounting errors leading to crash much later that might be very hard to track down. Add asserts to make sure that is the case. We also make sure that b_next_transaction is NULL in __jbd2_journal_unfile_buffer() since the callers expect that as well and we should not get into that stage in this state anyway, leading to problems later on if we do. Tested with fstests. Signed-off-by: Lukas Czerner Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 0a4314699907d6f62c61604b8562a268c9a777d1 Author: Wolfram Sang Date: Mon Aug 17 14:19:30 2020 +0200 i2c: rcar: in slave mode, clear NACK earlier [ Upstream commit 914a7b3563b8fb92f976619bbd0fa3a4a708baae ] Currently, a NACK in slave mode is set/cleared when SCL is held low by the IP core right before the bit is about to be pushed out. This is too late for clearing and then a NACK from the previous byte is still used for the current one. Now, let's clear the NACK right after we detected the STOP condition following the NACK. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 08496baa47361f8e4d4710800dbe4ad59d73c086 Author: Zhi Chen Date: Tue Jan 14 12:35:21 2020 +0800 Revert "ath10k: fix DMA related firmware crashes on multiple devices" [ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit eebbe8dbd88893b86c25bc24ffe3227a0ca9b245 Author: Changming Liu Date: Sat Jul 11 00:30:18 2020 -0400 USB: sisusbvga: Fix a potential UB casued by left shifting a negative value [ Upstream commit 2b53a19284f537168fb506f2f40d7fda40a01162 ] The char buffer buf, receives data directly from user space, so its content might be negative and its elements are left shifted to form an unsigned integer. Since left shifting a negative value is undefined behavior, thus change the char to u8 to elimintate this UB. Signed-off-by: Changming Liu Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit d7bf4ae5b98909ab7bf4e700da36ea7e52959503 Author: Arnd Bergmann Date: Mon Jul 6 15:22:46 2020 +0200 powerpc/spufs: add CONFIG_COREDUMP dependency [ Upstream commit b648a5132ca3237a0f1ce5d871fff342b0efcf8a ] The kernel test robot pointed out a slightly different error message after recent commit 5456ffdee666 ("powerpc/spufs: simplify spufs core dumping") to spufs for a configuration that never worked: powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump': >> file.c:(.text+0x4c68): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump': file.c:(.text+0x4d70): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump': file.c:(.text+0x4df4): undefined reference to `.dump_emit' Add a Kconfig dependency to prevent this from happening again. Reported-by: kernel test robot Signed-off-by: Arnd Bergmann Acked-by: Jeremy Kerr Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de Signed-off-by: Sasha Levin commit 0685dde3e21df9b1143adb3b07b70528d0c8b37e Author: Evgeny Novikov Date: Thu Jul 23 19:04:53 2020 +0200 media: davinci: vpif_capture: fix potential double free [ Upstream commit 602649eadaa0c977e362e641f51ec306bc1d365d ] In case of errors vpif_probe_complete() releases memory for vpif_obj.sd and unregisters the V4L2 device. But then this is done again by vpif_probe() itself. The patch removes the cleaning from vpif_probe_complete(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit ef898164bf570fabc9751a1ccc9df93e14986e93 Author: Jason Baron Date: Thu Jul 16 14:25:11 2020 -0400 EDAC/ie31200: Fallback if host bridge device is already initialized [ Upstream commit 709ed1bcef12398ac1a35c149f3e582db04456c2 ] The Intel uncore driver may claim some of the pci ids from ie31200 which means that the ie31200 edac driver will not initialize them as part of pci_register_driver(). Let's add a fallback for this case to 'pci_get_device()' to get a reference on the device such that it can still be configured. This is similar in approach to other edac drivers. Signed-off-by: Jason Baron Cc: Borislav Petkov Cc: Mauro Carvalho Chehab Cc: linux-edac Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.com Signed-off-by: Sasha Levin commit bd64f40ad711f8960a62c229d2a26375accd92f6 Author: Javed Hasan Date: Wed Jul 29 01:18:24 2020 -0700 scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del() [ Upstream commit e95b4789ff4380733006836d28e554dc296b2298 ] In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then freed it if ctlr_dev was not NULL. This was causing a memory leak. Free the fcf even if ctlr_dev is NULL. Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com Reviewed-by: Girish Basrur Reviewed-by: Santosh Vernekar Reviewed-by: Saurav Kashyap Reviewed-by: Shyam Sundar Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit a54a180e4c23a4d4dbaa4532d38441720f2f1941 Author: Xiubo Li Date: Wed Jul 1 01:52:48 2020 -0400 ceph: fix potential mdsc use-after-free crash [ Upstream commit fa9967734227b44acb1b6918033f9122dc7825b9 ] Make sure the delayed work stopped before releasing the resources. cancel_delayed_work_sync() will only guarantee that the work finishes executing if the work is already in the ->worklist. That means after the cancel_delayed_work_sync() returns, it will leave the work requeued if it was rearmed at the end. That can lead to a use after free once the work struct is freed. Fix it by flushing the delayed work instead of trying to cancel it, and ensure that the work doesn't rearm if the mdsc is stopping. URL: https://tracker.ceph.com/issues/46293 Signed-off-by: Xiubo Li Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit 753068bc2cdc6f1a88a41c8de98c009fd6bcd757 Author: Jing Xiangfeng Date: Mon Jun 15 16:12:26 2020 +0800 scsi: iscsi: Do not put host in iscsi_set_flashnode_param() [ Upstream commit 68e12e5f61354eb42cfffbc20a693153fc39738e ] If scsi_host_lookup() fails we will jump to put_host which may cause a panic. Jump to exit_set_fnode instead. Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com Reviewed-by: Mike Christie Signed-off-by: Jing Xiangfeng Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c75c7581937bf2668bcba1d958ff48954d8bba88 Author: Chris Wilson Date: Sat Jul 25 19:51:10 2020 +0100 locking/lockdep: Fix overflow in presentation of average lock-time [ Upstream commit a7ef9b28aa8d72a1656fa6f0a01bbd1493886317 ] Though the number of lock-acquisitions is tracked as unsigned long, this is passed as the divisor to div_s64() which interprets it as a s32, giving nonsense values with more than 2 billion acquisitons. E.g. acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg ------------------------------------------------------------------------- 2350439395 0.07 353.38 649647067.36 0.-32 Signed-off-by: Chris Wilson Signed-off-by: Ingo Molnar Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20200725185110.11588-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin commit 28bec409535ee09f7f121807cdb9e394eab47562 Author: Aditya Pakki Date: Sat Jun 13 20:22:23 2020 -0500 drm/nouveau: Fix reference count leak in nouveau_connector_detect [ Upstream commit 990a1162986e8eff7ca18cc5a0e03b4304392ae2 ] nouveau_connector_detect() calls pm_runtime_get_sync and in turn increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by: Aditya Pakki Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit 7592eb3b6cf80eaeb1e648a258a3031e95141f64 Author: Aditya Pakki Date: Sat Jun 13 20:33:42 2020 -0500 drm/nouveau/drm/noveau: fix reference count leak in nouveau_fbcon_open [ Upstream commit bfad51c7633325b5d4b32444efe04329d53297b2 ] nouveau_fbcon_open() calls calls pm_runtime_get_sync() that increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by: Aditya Pakki Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit a43f5de749e72a960003264833dab4407af00fbd Author: Peng Fan Date: Tue Jul 14 20:30:18 2020 +0800 mips/vdso: Fix resource leaks in genvdso.c [ Upstream commit a859647b4e6bfeb192284d27d24b6a0c914cae1d ] Close "fd" before the return of map_vdso() and close "out_file" in main(). Signed-off-by: Peng Fan Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit ab75ab9165de8fb8d037454856afb165e8d8b06d Author: Reto Schneider Date: Mon Jun 22 15:21:12 2020 +0200 rtlwifi: rtl8192cu: Prevent leaking urb [ Upstream commit 03128643eb5453a798db5770952c73dc64fcaf00 ] If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by: Reto Schneider Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch Signed-off-by: Sasha Levin commit d22aec437d771dc6b57b73ef14454a1aef44fa8c Author: Qiushi Wu Date: Wed May 27 21:13:22 2020 -0500 PCI: Fix pci_create_slot() reference count leak [ Upstream commit 8a94644b440eef5a7b9c104ac8aa7a7f413e35e5 ] kobject_init_and_add() takes a reference even when it fails. If it returns an error, kobject_put() must be called to clean up the memory associated with the object. When kobject_init_and_add() fails, call kobject_put() instead of kfree(). b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem. Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu Signed-off-by: Qiushi Wu Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin commit 535f69f4217178fd64c03b7b3c1421cfaf3d6e10 Author: Desnes A. Nunes do Rosario Date: Fri Jun 26 13:47:37 2020 -0300 selftests/powerpc: Purge extra count_pmc() calls of ebb selftests [ Upstream commit 3337bf41e0dd70b4064cdf60acdfcdc2d050066c ] An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per- formed when count_pmc() is used to reset PMCs on a few selftests. This extra pmc_count can occasionally invalidate results, such as the ones from cycles_test shown hereafter. The ebb_check_count() failed with an above the upper limit error due to the extra value on ebb_state.stats.pmc_count. Furthermore, this extra count is also indicated by extra PMC1 trace_log on the output of the cycle test (as well as on pmc56_overflow_test): ========== ... [21]: counter = 8 [22]: register SPRN_MMCR0 = 0x0000000080000080 [23]: register SPRN_PMC1 = 0x0000000080000004 [24]: counter = 9 [25]: register SPRN_MMCR0 = 0x0000000080000080 [26]: register SPRN_PMC1 = 0x0000000080000004 [27]: counter = 10 [28]: register SPRN_MMCR0 = 0x0000000080000080 [29]: register SPRN_PMC1 = 0x0000000080000004 >> [30]: register SPRN_PMC1 = 0x000000004000051e PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e) [FAIL] Test FAILED on line 52 failure: cycles ========== Signed-off-by: Desnes A. Nunes do Rosario Tested-by: Sachin Sant Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com Signed-off-by: Sasha Levin commit f515dc79ef81b21e4745bcc79a056a29b8f4c06d Author: Dick Kennedy Date: Tue Jun 30 14:49:54 2020 -0700 scsi: lpfc: Fix shost refcount mismatch when deleting vport [ Upstream commit 03dbfe0668e6692917ac278883e0586cd7f7d753 ] When vports are deleted, it is observed that there is memory/kthread leakage as the vport isn't fully being released. There is a shost reference taken in scsi_add_host_dma that is not released during scsi_remove_host. It was noticed that other drivers resolve this by doing a scsi_host_put after calling scsi_remove_host. The vport_delete routine is taking two references one that corresponds to an access to the scsi_host in the vport_delete routine and another that is released after the adapter mailbox command completes that destroys the VPI that corresponds to the vport. Remove one of the references taken such that the second reference that is put will complete the missing scsi_add_host_dma reference and the shost will be terminated. Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 28e269f9e6ac6dd13fc8342994130d2d90c77ee6 Author: Navid Emamdoost Date: Sun Jun 14 02:05:28 2020 -0500 drm/amdgpu/display: fix ref count leak when pm_runtime_get_sync fails [ Upstream commit f79f94765f8c39db0b7dec1d335ab046aac03f20 ] The call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 9b1e3b74c4e35eaaa2fc41c9bb805405c9390fa7 Author: Navid Emamdoost Date: Sun Jun 14 02:09:44 2020 -0500 drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config [ Upstream commit e008fa6fb41544b63973a529b704ef342f47cc65 ] in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 0d097bfa614a0b13224ddc4536c2a464f0e0b5fe Author: Navid Emamdoost Date: Sun Jun 14 02:14:50 2020 -0500 drm/amd/display: fix ref count leak in amdgpu_drm_ioctl [ Upstream commit 5509ac65f2fe5aa3c0003237ec629ca55024307c ] in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 6d0364cd0f378fdb5d4a707f0a6c3111bcea7b32 Author: Navid Emamdoost Date: Sun Jun 14 02:12:29 2020 -0500 drm/amdgpu: fix ref count leak in amdgpu_driver_open_kms [ Upstream commit 9ba8923cbbe11564dd1bf9f3602add9a9cfbb5c6 ] in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 87fe5b5f59beeec0780990a1ea2ebc857d17e965 Author: Aditya Pakki Date: Sat Jun 13 20:55:39 2020 -0500 drm/radeon: fix multiple reference count leak [ Upstream commit 6f2e8acdb48ed166b65d47837c31b177460491ec ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Aditya Pakki Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit c9cfd9445098b88776729168d9ec5244442052df Author: Qiushi Wu Date: Sat Jun 13 14:32:26 2020 -0500 drm/amdkfd: Fix reference count leaks. [ Upstream commit 20eca0123a35305e38b344d571cf32768854168c ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Signed-off-by: Qiushi Wu Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit c533db361549bdabb30fa88f2b712c2766580e6a Author: Bodo Stroesser Date: Mon Jun 29 11:37:56 2020 +0200 scsi: target: tcmu: Fix crash on ARM during cmd completion [ Upstream commit 5a0c256d96f020e4771f6fd5524b80f89a2d3132 ] If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com Tested-by: JiangYu Acked-by: Mike Christie Signed-off-by: Bodo Stroesser Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit eb08c18bf7cb0e09de15142becabd193614f2704 Author: Jia-Ju Bai Date: Sat May 30 16:42:08 2020 +0200 media: pci: ttpci: av7110: fix possible buffer overflow caused by bad DMA value in debiirq() [ Upstream commit 6499a0db9b0f1e903d52f8244eacc1d4be00eea2 ] The value av7110->debi_virt is stored in DMA memory, and it is assigned to data, and thus data[0] can be modified at any time by malicious hardware. In this case, "if (data[0] < 2)" can be passed, but then data[0] can be changed into a large number, which may cause buffer overflow when the code "av7110->ci_slot[data[0]]" is used. To fix this possible bug, data[0] is assigned to a local variable, which replaces the use of data[0]. Signed-off-by: Jia-Ju Bai Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit ed36291b5c426b21210972dc8d28f591e22294fc Author: Qiushi Wu Date: Sat Jun 13 15:44:19 2020 -0500 ASoC: tegra: Fix reference count leaks. [ Upstream commit deca195383a6085be62cb453079e03e04d618d6e ] Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Qiushi Wu Reviewed-by: Jon Hunter Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 1e2b25b071d3dd1d3fe069d957798713cb961baa Author: Randy Dunlap Date: Wed Aug 5 19:19:26 2020 -0700 ALSA: pci: delete repeated words in comments [ Upstream commit c7fabbc51352f50cc58242a6dc3b9c1a3599849b ] Drop duplicated words in sound/pci/. {and, the, at} Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@infradead.org Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit fe9184c3b534d95b9ee8d5996081d43936d468fd Author: Vasant Hegde Date: Thu Aug 27 13:13:07 2020 +0530 powerpc/pseries: Do not initiate shutdown when system is running on UPS commit 90a9b102eddf6a3f987d15f4454e26a2532c1c98 upstream. As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Vasant Hegde Signed-off-by: Sasha Levin commit e6270d3cd0954707f0c4db83117fb6600b45038d Author: Cong Wang Date: Fri Aug 14 20:05:58 2020 -0700 bonding: fix a potential double-unregister [ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ] When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet Cc: Andy Gospodarek Cc: Jay Vosburgh Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 8ddbef045e8cc9fc984995c248478646d959445b Author: Jarod Wilson Date: Thu Aug 13 10:09:00 2020 -0400 bonding: show saner speed for broadcast mode [ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ] Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: "David S. Miller" CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f7f299f1a5021d968df7af9fcbeba8c465671b0a Author: Mahesh Bandewar Date: Fri Aug 14 22:53:24 2020 -0700 ipvlan: fix device features [ Upstream commit d0f5c7076e01fef6fcb86988d9508bf3ce258bd4 ] Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar Cc: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a0953a565fb04d45fd8f8326f8ed0fb175e4698c Author: Cong Wang Date: Sat Aug 15 16:29:15 2020 -0700 tipc: fix uninit skb->data in tipc_nl_compat_dumpit() [ Upstream commit 47733f9daf4fe4f7e0eb9e273f21ad3a19130487 ] __tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea67769ff33 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy Cc: Ying Xue Cc: Richard Alpe Signed-off-by: Cong Wang Acked-by: Ying Xue Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c40fc891ca6c7ada3b10e5c16593e6469d4dfa22 Author: Miaohe Lin Date: Sat Aug 15 04:44:31 2020 -0400 net: Fix potential wrong skb->protocol in skb_vlan_untag() [ Upstream commit 55eff0eb7460c3d50716ed9eccf22257b046ca92 ] We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or we may access the wrong data. Fixes: 0d5501c1c828 ("net: Always untag vlan-tagged traffic on input.") Signed-off-by: Miaohe Lin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman